Related high-performance liquid chromatograph models: i-Series, Nexera, Prominence, UFLC, LC-2030, LC-2040, LC-30A, LC-20A, LC-VP, LC-10Avp, LC-10A, LC-9A, LC-8A, LC-6A, and ion chromatograph Other names for related units and parts: HPLC, pump, autoinjector, plunger, plunger seal, check valve, and suction filter
Efficient, Easy to Use, Space Saving Up to six fraction collectors can be connected simultaneously. Compatible with many racks corresponding to the intended fraction volume. Can accommodate up to 3,240 fractions (6 FRC-40s, 10 mm tubes).
The evaporative light scattering detector (ELSD) is a general-purpose universal detector that can even detect components with no UV absorption, such as carbohydrates, lipids, surfactants, and synthetic polymers.* With exceptional sensitivity, a wide dynamic range through Analytical Intelligence features, and easy operability using LabSolutions™ software, the ELSD-LT III contributes to more effective analysis in a […]
The CTO-20A is a forced air-circulation-type column oven. It can regulate the temperature in a range going from 10 deg. C above room temperature to 85 deg. C. The CTO-20AC, using an electronic cooler, can regulate the temperature in a large range going from 10 deg. C below room temperature to 85 deg. C. In addition to […]
The CRB-40 chemical reaction box is a new unit of Nexera series and is used for post-column derivatization analysis.
The total-volume injection SIL-30AC autosampler features a pressure tolerance of 130 MPa as well as the world’s fastest sample injection (10 seconds), which dramatically reduces the total cycle time. It includes auto pretreatment and overlapping functions as standard, and an optional loop-injection method configuration to minimize delay volume. With reduction of the needle contact area, […]
This parallel double-plunger model provides superior performance at micro flow rates, and enables stable delivery over a wide range of flow rates, from 0.0001 to 3.0000 mL/min (with a maximum operating pressure of 130 MPa) or from 3.001 to 5.000 mL/min (with a maximum operating pressure of 80 MPa). Its ultrahigh-pressure capacity allows using long […]
The High Sensitivity You Expect from a Low Flow System with the Ruggedness of HPLC Covering the Complete Range from Micro to Semi-Micro Improvement in the sensitivity of an LC/MS/MS method can generally be achieved by reducing the analytical scale of the analysis. However, reducing the analytical scale significantly to nano-flow reduces the throughput, stability, and robustness as a trade-off for […]
The i-Series Method Transfer System (MT system) enables both conventional analysis via its high compatibility with existing LC systems and rapid analysis via high-speed methods.In pharmaceutical development, a single integrated system allows process synthesis screening analysis for synthetic substances in the UHPLC flow line, and impurity content identification in the HPLC flow line. Analysis results […]
Double your sample throughput and simplify batch analysis with the Nexera MX multiplex LC/MS system. The MX Dual Stream Technology (MX-DST) system allows near-continuous data acquisition and halves analysis times for batch analysis compared to conventional LC/MS analysis. LabSolutions Connect™ software improves workflow efficiency by speeding up the labor-intensive tasks of MRM optimization, method creation and batch […]